The Castle Project Chapter 11: The Turkish Spa

This room was my obsession from start to finish.  It was the first room I actually purchased a good bit of the materials used, though I also used a lot of recycled stuff.  It's probably the most expensive room.  Many late nights were spent on this endeavor, and every minute was worth it.  It dethroned Jasmine's room as my favorite.
 The first part of my obsessive vision was that it had to have columns.  My mild addiction to Good and Plenty was very helpful with this.  My children's fondness for Mike and Ike's didn't hurt either.  After drawing the arch for the columns on one box, I used the cutout as a template for the rest.  I put packing peanuts into all the box cavities to provide substance and strength.
I glued all the arches to the walls and stuffed the spaces in between the boxes with packing peanutes and cut portions of toilet paper roles to form the end columns.  Then I painted a base coat of blue on the walls and floor.

I wanted a smooth and firm surface for the spaces above the columns and over the gaps so I cut up a cereal box and covered those areas.  I also put down the paper I used for the flooring.  It just looked like a ancient tile floor to me.  I laid out the paper I used for the walls.  There was a little lip as the paper went from the candy box to the primary box but I was comfortable with that from a design perspective.  The interior walls of the arches also had to be smoothed out, I used long strips from the sides of other candy boxes to provide the smooth surface.

I also fitted the toilet paper rolls I planned to use for the columns--it wasn't as simple as cutting them open, they had 

Then I finished papering the walls that would be exposed after the columns went up.

The next task was all sorts of tedious but the results were pretty gorgeous, if I do says so myself.  Each bead was put on individually.  Tacky Glue is the bomb.  I used a straight pin to help me pick up and place the beads.  The goal was to turn the beads so that the holes didn't show, once the column was completed.  I used glass beads from the craft section a walmart because they were dramatically less expensive than anywhere else.  It is not my intention to spend a fortune on this castle.  Had that been the plan, I could have bought something pre-fab and just decorated it..

Before putting the columns on I papered the inside walls of the arches with the same paper I'd used for the floor.  I started out trying to string the beads on for ceiling to make a particular pattern but it didn't go quite as easily as planned--the beads kept slipping off the string.  But in the end I got the look I was going for an organic looking patternless sort of pattern.

Then I needed to address the paper lines.  Not so pretty and I had to figure out what to do do about the open tops of the columns.  Lots of little wooden craft sticks got a bronze paint job.

Half moons of wider wood slates were cut to fit the tops of the columns, the edges were lined with beads.  The white spaces around the arches got painted with the bronze, as did a strip of wall above the door.  Little wood trim pieces were glued on and then decorative beads hid any join and added interest.

I wasn't satisfied with the space.  Turkish baths have even more to see, usually, I made little cool water fountains with foam beads cut in half and more fancy beads (from a rather inexpensive pack of plastic jewelry making sets I got at walmart and ended up using in several parts of this room as well as many others.)  I tried using hot glue for the sinks and burned my fingers pretty badly, so I ended up using tacky glue, which was the better choice.

The bath started out as a deli meat container.  I papered the outside of the tub with a paper similar to the one I used for the floor. To keep things looking neat, I cut a piece to fit the raised part of the bottom of the container and modge podged that to the inside of the bath.  Then I covered the outsid with bronze painted wooden slates.  I painted the edges of the tub with bronze paint and added fancy leaf shaped beads (from the kit mentioned above) along the top edge.  I used other beads from the kit to be faucets and the bottom was trimmed with still more beads (some holes show, but the girls don't seem to care).

I didn't like the end result of the way the bronzed wooden slats looked.  So I mixed modge podge with some very fine glitter and painted the mixture, thickly, onto the wooden slats.

I also painted the interior lip in the plastic container--I just liked the way that looked better.

The door got painted bronze as well.  A doorknob made from a broken ring finished off the door to what will one day be a shower and dressing room.

This became my favorite room for a long time.  I want to 3.5" high so I can hang out in here.  Of course, there is no running water so it wouldn't really be that cool.  My girls have been warned that it will ruin the room and the castle for them to try to fill the bath with real water.

,

The Castle Project Chapter 10: The Dining Room and Sitting Room

The dining room and the sitting room were planned for the first wing of the castle and the walls, floors and ceilings went in about the same time as the creation of the ballroom.  They started life as Girl Scout cookie cases.  

I was especially pleased with the ceiling in the dining room, gold vellum over pink paper. 

 The ceiling in the sitting room is textured and shiny.  All the paper and stickers came out of my extensive stash of scrapbooking materials.  The rug starts out as thick water color paper, to give it depth and presence.  When I get back to scrapbooking again, I may need to go shopping, but for now I'm putting my inventory to good use.

 As the project continues, I get better at dealing with openings between rooms.  In this case, I made the hole primarily to keep the spaces from being too dark.  We'll call it a "magic" wall, instead of an opening between rooms.

The rooms sat empty for a good while.  I started to work on other rooms.  I had the idea that I should just do the background first and worry about furniture later, but after working on a few bedrooms, it became clear that I furniture was pretty pivotal to the whole design process.

I had a pile of silk, cashmere and silk blend sweaters and tops that were ruined from spills, tears or moths.  I finally discovered why I had been saving them.  They were turned into a pile of luxurious scraps, fit for many uses, particularly furniture coverings.  

 My daughter gets Capri Sun Super V in her lunch.  If you open the package the way it's supposed to be opened, instead of just ripping it open, you get this pretty sturdy and nicely shaped wedge shaped piece.  Or, as I saw it, the foundation for a sofa.

 The larger, smooth portion became the back.

 The sides got a nice trim to form arms.

 After I made the first arm, I used the scrap to make the pattern for the other side.

 There was the start of my sofa.  I made one more the exact same way.

I used masking tape to cover the entire sofa, creating a better painting surface.  Then I created cushions using some cashmere sweater scraps.  The fabric as wrapped around a shaped piece of cardboard.  I cut feet out of cardboard, painted the taped cardboard dark brown and then trimmed with gold paint.  I forgot to document this part.   Hot glue was used.  Fingers were burned (I may not have fingerprints by the time this project is complete).

The next thing to tackle was the dining room.  I was feeling stuck but then happened upon an idea, inspired by images of table tops.  I enlisted my sister's boyfriend to come up with a good way to set up a foundation that would support the image that I found.  Using cardboard and wooden craft sticks he created a foundation.  Then he and my sister left and I put his start into the dining room.  I thought it was a little too small.  I printed off a larger image, and cut another cardboard top.  Then I taped it all up.  But the legs weren't quite right.  They were too plain.  So I grabbed some pipe cleaners and tape and started to work on it.

 After fancying up the legs, it got a paint job.

Then it got a layer of gold paint along the edges and feet, with a dry brush of gold on the legs to better go with the table top image.  Then the image was applied.  

The finished table looked awesome in the dining room.  

Now it was time for the chairs.  A while ago, I'd started making chairs using cups from an egg carton.  Once I had the table, I decide those chairs had to be used for something else.  They just didn't work for the table. So new chairs had to be constructed.
My new favorite building material, wooden craft sticks, came to save the day.  I already had a bunch of them because of some craft project I did with the girls for Christmas or something.  I played a little bit with dimensions that would work for the table and the dolls.
Then the painting began.  First a dark coat of brown and then rubbing down with gold.  I wanted the brown to show through a little bit, but not too much.

 Chair seats were fashioned with the tongue depressor sized craft sticks, cut to size and simply taped.  The cushion was stuffed with squares of my sweater scraps.  Then a larger square of fabric was hot glued down with a another "board" across the bottom (perpendicular to the other boards).

 Then I made the backs of the chairs with the curved part of a tongue depressor sized craft stick.  I had a small stack of fabric cut to size.  Then a larger piece was wrapped around the chair back.

 Next I set up the full back of the chairs.  The bottoms had been snipped of the popsicle sized craft sticks.  A tongue depressor sized back piece was hot glued between two of the thin wood sticks.  Then the cushioned chair back was hot glued to the back.

Then all the rest of the chair components were gathered to make each chair.  The assembled back, the seat cushion, two front legs and four braces.  

The front legs were hot glued to the seat cushion, then the front brace was glued on--it adds stability and covers the unfinished looking area of the cushion.  Next the seat and front legs are hot glued to the back of the chair.  At this point we have chair but a rather fragile one.

So I added braces to the other three sided of the chair. 

 All twelve of them.  To create a little more detail, I used finger nail decals to the back parts of the chair and painted over them to add a tiny bit of detail to the chairs.

I think they look great with the table.  Exactly the look I was trying to get.

 All twelve chairs fit, even with dolls in it. But it's a little bit crowded.

The girls approved of the new furniture.  So did the dolls.

I, however wasn't quite satisfied.  For the first time in the project, I went out and bought something specifically for the castle besides adhesives.  

I purchased candelabrum for the dining room.  I also bought some dishes, a lobster platter, some bread and cheese and some china.  Later, the girls made some fruits out of PlayDoh we let dry out. I glued the candelabrum to the table to keep them from getting destroyed.  The dishes and food is getting played with all over the place, whether I like it or not.  

 I made a coffee table out a wooden shape I'd bought and added some beads to the bottom for feet.  I, also, couldn't resist the pewter tea set.  

I think the sitting room needs a little something more, like lighting and perhaps some art or portraits on the walls.  I just haven't come up with the right inspiration.  I'll figure it out.  Meanwhile, the girls happily play with both rooms.